manualshive.com logo in svg

Thermo Scientific 3600 PDM, Руководство пользователя

Поделиться
Скачать
Thermo Scientific 3600 PDM Скачать руководство пользователя страница 6

Safety 

Safety and Equipment Damage Alerts 

ii

     PDM 3600 Instruction Manual 

Thermo Fisher Scientific 

Safety 

 

Repair of instrumentation manufactured by Thermo Scientific should only 
be attempted by properly trained service personnel, and should only be 
conducted in accordance with system documentation. Do not tamper with 
this hardware. High voltages may be present in all instrument enclosures. 
Use established safety precautions when working with this instrument. 

There are several safety hazards that the general operator and service 
technician must be aware of when operating and servicing the TEOM 
3600 PDM. The hazards include: burn hazards, moving parts and pinch 
hazards, and voltage hazards. 

The seller cannot foresee all possible modes of operation in which the user 
may attempt to utilize this instrumentation. The user assumes all liability 
associated with the use of this instrumentation. The seller further disclaims 
any responsibility for consequential damages. Use of this product in any 
manner not intended by the manufacturer will void the safety protection 
provided by the equipment, and may damage the equipment and subject 
the user to injury. 

Содержание 3600 PDM





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды