Thermo Scientific 3600 PDM, Руководство пользователя

Страница: 25 / 132

Thermo Fisher Scientific PDM 3600 Instruction Manual 2-1
Chapter 2
Basic Operation
This section describes setting up the TEOM 3600 Personal Dust Monitor
(PDM) and connecting it to the charger, installing a TEOM filter and
setting up basic sample runs.
Upon receiving the PDM unit, ensure that a TEOM filter is installed in
the mass transducer and connect the unit to the charger (
Figure 2–1 ). To
fully charge the internal lithium-ion batteries, allow the PDM unit to
remain connected to the charger for approximately 6 hours before
performing the first sample run. Charging must be completed in a fresh air
environment.
Figure 2–1. TEOM 3600 PDM mass transducer with filter
TEOM filter