Thermo Scientific 3600 PDM, Руководство пользователя

Страница: 59 / 132

Using the WinPDM Software
Starting a Programmed Sample Run
Thermo Fisher Scientific PDM 3600 Instruction Manual 3-7
screen will display. Refer to Configuring a Program Shift later in this
chapter for more information on correcting programming errors.
Figure 3–6. Programmed
You can now exit from the WinPDM software application and disconnect
the PDM unit from its charger. If you leave the PDM connected to the
charger, the PDM - COM1 screen will display the “Start Time” (date and
time) on the screen (
Figure 3–7 ) until 35 minutes before the start
date/time. At the 35-minutes mark, the PDM - COM1 screen will display
a “Warming” message on the screen for 35-minutes. After the warming
period ends, the PDM unit will begin its sample run and the PDM -
COM1 screen will display a “Running” message on the screen (
Figure 3–
8 ).