Thermo Scientific 3600 PDM, Руководство пользователя

Страница: 28 / 132

Basic Operation
Connecting to The Charger
2-4 PDM 3600 Instruction Manual Thermo Fisher Scientific
3. Set the alignment post into the hole in the back of the PDM. Turn the
handle to tighten the connection screw into the connector (
Figure 2–4
and Figure 2–5 ).
Figure 2–4. Setting the charger connector onto the unit
Figure 2–5. Locking in the PDM charger connection
4. Install the 15-pin connector of the communications/power cable into
the “TO PDM” port on the charger.
5. Locate the RS232 cable and install one end of the RS232 cable into the
“TO PC” port on the charger and the other end of the RS232 cable
onto a serial 9-pin COM port on your laptop/PC.