Texas Instruments TMS320C6 Series, Руководство пользователя

Страница: 278 / 304

Alphabetical Summary of Debugger Messages
B-12
Invalid watch delete
Description The debugger can’t delete the parameter supplied with the
WD command. Usually, this is because the watch index
doesn’t exist or because a symbol name was typed instead of
a watch index.
Action Reenter the WD command. Be sure to specify the watch
index that matches the item you’d like to delete (this is the
number in the left column of the WATCH window). Remem-
ber, you can’t delete items symbolically—you must delete
them by number.
Invalid window position
Description
The debugger can’t move the active window to the XY posi-
tion specified with the MOVE command. Either the XY param-
eters are not within the screen limits, or the active window
may be too large to move to the desired position.
Action You can use the mouse to move the window.
-
If you don’t have a mouse, enter the MOVE command
without parameters; then use the arrow keys to move the
window. When you’re finished, you
must press
ESC
or
.
-
If you prefer to use the MOVE command with parameters,
the minimum XY position is 0,1; the maximum position
depends on which screen size you’re using.
Invalid window size
Description The width and length specified with the SIZE or MOVE com-
mand may be too large or too small. If valid width and length
were specified, then the active window is already at the far
right or bottom of the screen and so cannot be made larger.
Action
You can use the mouse to size the window.
-
If you don’t have a mouse, enter the SIZE command with-
out parameters; then use the arrow keys to move the win-
dow. When you’re finished, you
must press
ESC
or .
-
If you prefer to use the SIZE command with parameters,
the minimum size is 4 by 3; the maximum size depends
on which screen size you’re using.