manualshive.com logo in svg

Texas Instruments TMS320C6 Series, Руководство пользователя

Поделиться
Скачать
Texas Instruments TMS320C6 Series Скачать руководство пользователя страница 273

 Alphabetical Summary of Debugger Messages

B-7

  Debugger Messages

Corrupt call stack

Description

The debugger tried to update the CALLS window and
couldn’t. This may be because a function was called that
didn’t return. Or it could be that the program stack was over-
written in target memory. Another reason you may have this
message is that you are debugging code that has optimiza-
tion enabled (for example, you did not use the –g compile
switch); if this is the case, ignore this message—code execu-
tion is not affected.

Action

If your program called a function that didn’t return, then this is
normal behavior (as long as you intended for the function not
to return). Otherwise, you may be overwriting program
memory.

E

Error in expression

Description

This is an expression error.

Action

See Section B.3, 

Additional Instructions for Expression Errors,

page B-17.

F

File does not exist

Description

The port file could not be opened for reading.

Action

Be sure that the file exists as named. If it does, enter the USE
command to identify the file’s directory.

File not found

Description

The filename specified for the FILE command was not found
in the current directory or any of the directories identified with
D_SRC.

Action

Be sure that the filename was typed correctly. If it was, reenter
the FILE command and specify full path information with the
filename.

Содержание TMS320C6 Series

















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды