manualshive.com logo in svg

Texas Instruments TMS320C6 Series, Руководство пользователя

Поделиться
Скачать
Texas Instruments TMS320C6 Series Скачать руководство пользователя страница 271

 Alphabetical Summary of Debugger Messages

B-5

  Debugger Messages

Cannot open “

filename”

Description

The debugger attempted to show 

filename in the FILE win-

dow but could not find the file.

Action

Be sure that the file exists as named. If it does, enter the USE
command to identify the file’s directory.

Cannot open object file: “

filename”

Description

The file specified with the LOAD, SLOAD, or RELOAD
command is not an object file that the debugger can load.

Action

Be sure that you’re loading an actual object file. Be sure that
the file was linked (you may want to run the cl6x shell program
again to create an executable object file).

Cannot open new window

Description

A maximum of 127 windows can be open at once. The last
request to open a window would have made 128, which isn’t
possible.

Action

Close any unnecessary windows. Windows that can be
closed include WATCH, CALLS, DISP, and additional
MEMORY windows. To close the WATCH window, enter WD.
To close any of these windows, make the desired window ac-
tive and press 

F4

.

Cannot read processor status

Description

This is a fatal error—for some reason, pressing 

ESC

 didn’t

halt program execution.

Action

Exit the debugger. Invoke the autoexec or initdb.bat file, then
invoke the debugger again.

Cannot reset the processor

Description

This is a fatal error—for some reason, pressing 

ESC

 didn’t

halt program execution.

Action

Exit the debugger. Invoke the autoexec or initdb.bat file, then
invoke the debugger again.

Cannot restart processor

Description

If a program doesn’t have an entry point, then RESTART
won’t reset the PC to the program entry point.

Action

Don’t use RESTART if your program doesn’t have an explicit
entry point.

Содержание TMS320C6 Series

















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды