manualshive.com logo in svg

Texas Instruments TMS320C6 Series, Руководство пользователя

Поделиться
Скачать
Texas Instruments TMS320C6 Series Скачать руководство пользователя страница 270

Alphabetical Summary of Debugger Messages

B-4

 

Cannot edit field

Description

Expressions that are displayed in the WATCH window cannot
be edited.

Action

If you attempted to edit an expression in the WATCH window,
you may have actually wanted to change the value of a sym-
bol or register used in the expression. Use the ? or EVAL
command to edit the actual symbol or register. The expres-
sion value will automatically be updated.

Cannot find/open initialization file

Description

The debugger can’t find the init.cmd file.

Action

Be sure that init.cmd is in the appropriate directory. If it isn’t,
copy it from the debugger product diskette. If the file is already
in the correct directory, verify that the D_DIR environment
variable is set up to identify the directory. See 

Setting Up the

Debugger Environment in the appropriate installation guide.

Cannot halt the processor

Description

This is a fatal error—for some reason, pressing 

ESC

 didn’t

halt program execution.

Action

Exit the debugger. Invoke the autoexec or initdb.bat file; then
invoke the debugger again.

Cannot map into reserved memory: ?

Description

The debugger tried to access unconfigured/reserved/nonex-
istent memory.

Action

Remap the reserved memory accesses.

Cannot open config file

Description

The SCONFIG command can’t find the screen-customization
file that you specified.

Action

Be sure that the filename was typed correctly. If it wasn’t,
reenter the command with the correct name. If it was, reenter
the command and specify full path information with the
filename.

Содержание TMS320C6 Series

















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды