Texas Instruments TMS320C6 Series, Руководство пользователя

Страница: 241 / 304

Alphabetical Summary of Debugger Commands
size, sl
11-37 Summary of Commands and Special Keys
Size Active Window
size
Syntax size [ width, length ]
Menu selection none
Environments basic debugger profiling
Description The SIZE command changes the size of the active window. You can use the
SIZE command in one of two ways:
-
By supplying a specific
width and length or
-
By omitting the width and length parameters and using function keys to
interactively resize the window.
Valid values for the width and length depend on the screen size and the
window position on the screen. If the window is in the upper left corner of the
screen, the maximum size of the window is the same as the screen size minus
one line. (The extra line is needed for the menu bar.) For example, if the screen
size is 80 characters by 25 lines, the largest window size is 80 characters by
24 lines.
If a window is in the middle of the display, you can’t size it to the maximum
height and width—you can size it only to the right and bottom screen borders.
The easiest way to make a window as large as possible is to zoom it, see
Zooming a window on page 3-26.
If you enter the SIZE command without width and length parameters, you can
use arrow keys to size the window.
↓ Makes the active window one line longer
↑
Makes the active window one line shorter
← Makes the active window one character narrower
→ Makes the active window one character wider
When you’re finished using the arrow keys, you must press or .
List Stopping Point
sl
Syntax sl
Menu selection Stop-points
→
List
Environments basic debugger profiling
Description The SL command lists all of the currently set stopping points.