Texas Instruments TMS320C6 Series, Руководство пользователя

Страница: 198 / 304

Running a Profiling Session
10-16
No matter which update rate you choose, you can force the PROFILE window
to be updated during a profiling session by pointing to the window header and
clicking a mouse button.
After you enter a PF or PQ command, your program restarts and runs to the
defined starting point. Profiling begins when the starting point is reached and
continues until a stopping point is reached or until you halt the profiling session
by pressing
ESC
.
pr Use the PR command to resume a profiling session that has halted. The syntax
for this command is:
pr [
clear data
[,
update rate]]
The optional clear data parameter tells the debugger whether or not it should
clear out the previously collected data. The clear data parameter can have one
of these values:
0 The profiler will continue to collect data (adding it to the existing
data for the profiled areas) and to use the previous internal profile
stacks. 0 is the default value.
nonzero All previously collected profile data and internal profile stacks are
cleared.
The
update rate parameter is the same as for the PF and PQ commands.