manualshive.com logo in svg

Texas Instruments TMS320C6 Series, Руководство пользователя

Поделиться
Скачать
Texas Instruments TMS320C6 Series Скачать руководство пользователя страница 204

Saving Profile Data to a File

 

10-22

10.7 Saving Profile Data to a File

You may want to run several profiling sessions during a debugging session.
Whenever you start a new profiling session,the results of the previous session
are lost. However, you can save the results of the current profiling session to
a system file. You can use two commands to do this:

vac

To save the contents of the PROFILE window to a system file, use the VAC
(view save current) command. The syntax for this command is:

vac

filename

This saves only the current view; if, for example, you are viewing only the
Count field, then only that information will be saved.

vaa

To save all data for the currently displayed areas, use the VAA (view save all)
command. The syntax for this command is:

vaa

filename

This saves all views of the data— including the individual count, inclusive,
etc.— with the percentage indications and histograms.

Both commands write profile data to 

filename. The filename can include path

information. There is no default filename. If 

filename already exists, the

command will overwrite the file with the new data.

Note that if the PROFILE window displays only a subset of the areas that are
marked for profiling, data is saved 

only for those areas that are displayed. (For

VAC, the currently displayed data will be saved for the displayed areas. For
VAA, all data will be saved for the displayed areas.) If some areas are hidden
and you want to save all the data, be sure to select View

→

Reset before saving

the data to a file.

The file contents are in ASCII and are formatted in exactly the same manner
as they are displayed (or would be displayed) in the PROFILE window. The
general profiling-session information that is displayed in the COMMAND
window is also written to the file.

Содержание TMS320C6 Series

















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды