Texas Instruments TMS320C6 Series, Руководство пользователя

Страница: 232 / 304

move
Alphabetical Summary of Debugger Commands
11-28
Move Active Window
move
Syntax move [ X position, Y position [, width, length ] ]
Menu selection none
Environments basic debugger profiling
Description The MOVE command moves the active window to the specified XY position.
If you choose, you can resize the window while you move it (see the SIZE
command for valid
width and length values). You can use the MOVE command
in one of two ways:
-
By supplying a specific X position and Y position or
-
By omitting the X position and Y position parameters and using function
keys to interactively move the window.
You can move a window by defining a new XY position for the window’s upper
left corner. Valid X and Y positions depend on the screen size and the window
size. X positions are valid if the X position plus the window width in characters
is less than or equal to the screen width in characters. Y positions are valid if
the Y position plus the window height is less than or equal to the screen height
in lines.
For example, if the window is 10 characters wide and 5 lines high and the
screen size is 80 x 25, the command move 70, 20 would put the lower right-
hand corner of the window in the lower right-hand corner of the screen. No X
value greater than 70 or Y value greater than 20 would be valid in this example.
If you enter the MOVE command without X position and Y position parameters,
you can use arrow keys to move the window.
↓ Moves the active window down one line
↑
Moves the active window up one line
← Moves the active window left one character position
→ Moves the active window right one character position
When you’re finished using the arrow keys, you must press or .