Texas Instruments TMS320C6 Series, Руководство пользователя

Страница: 274 / 304

Alphabetical Summary of Debugger Messages
B-8
File not found : “ filename”
Description The filename specified for the LOAD, RELOAD, SLOAD, or
TAKE command was not found in the current directory or any
of the directories identified with D_SRC.
Action
Be sure that the filename was typed correctly. If it was, reenter
the command and specify full path information with the
filename.
File too large ( filename)
Description You attempted to load a file that was more than 65 518 bytes
long.
Action Try loading the file without the symbol table (SLOAD), or use
lnk6x to relink the program with fewer modules.
Float not allowed
Description This is an expression error—a floating-point value was used
incorrectly.
Action
See Section B.3,
Additional Instructions for Expression Errors,
page B-17.
Function required
Description
The parameter for the FUNC command must be the name of a
function in the program that is loaded.
Action Reenter the FUNC command with a valid function name.
I
Illegal addressing mode
Description An illegal ’C6x addressing mode was encountered.
Action Refer to the TMS320C62xx CPU and Instruction Set Refer-
ence Guide for valid addressing modes.
Illegal cast
Description This is an expression error—the expression parameter uses
a cast that doesn’t meet the C language rules for casts.
Action See Section B.3, Additional Instructions for Expression Errors,
page B-17.