Telestream lightspeed live capture, Руководство пользователя

Страница: 70 / 350

Configuring the Lightspeed Live Capture Server and Apps
Configuring Settings for Your Facility
70
Lightspeed Live Capture User Guide
Configuring Settings for Your Facility
A few settings are required on your Lightspeed Live server before you launch the
Lightspeed Live Capture or Tape Capture web application. Some of these settings are
configured at the factory, but you should verify them and make additional custom
settings as follows:
1: Open the Vantage Management Console.
Launch the Vantage Management Console by double-clicking the desktop
icon.
(To learn more about any of the following steps, click the question mark
(?) in the upper right corner of the Console to open the searchable
Vantage Domain Management Guide .)
2: Apply Your License.
Apply your Lightspeed Live Capture license by clicking Licenses in the left panel and
verifying that you have a Live Capture license.
If not, contact Telestream for a license, and click the Add/Update a License button in
the Licenses panel to add the new license.
3: Activate User Administration.
Activate User Administration (or verify that it was activated at the factory.) Select
Settings & Options in the left panel. On the General tab, verify that Enable user
administration is selected, and if not, select it. This must be enabled in order to use the
Lightspeed Live Capture web application.
You may also want to check Use Windows Active Directory for Users to use your Windows
logins for Vantage. Alternatively, you can create Vantage-only users if you leave the
Windows option unchecked. If you made any changes, click the
Save icon .