TANDBERG SM6610, Справочное руководство

Страница: 94 / 200

Front Panel Control
Page 4-4 Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
ST.RE.E10152.2
Table 4.1: Front Panel Pushbutton Functions
Pushbutton Description
Enter
Main pushbutton for making selections.
Cancel
Takes user back one menu; or out of Edit Mode, cancelling any changes made.
3 4 5 6
Directional arrow pushbuttons for navigating Left, Right, Up and Down.
Screen Symbols
The front panel display uses a number of symbols and conventions.
Figure 4.2 illustrates the use of arrows on the front panel display.
Table 4.2 describes the symbols and conventions used with the front panel
display.
Figure 4.2: Front Panel LCD Symbols
Table 4.2: Front Panel LCD Symbols
Symbol Description
↑
Indicates there are more menu selections above.
↓
Indicates there are more menu selections below.
→
Indicates current selection that can be edited or viewed. To change the selection, use the arrow pushbuttons
to scroll up and down.

Dash indicates current selection (viewing only).
[ ]
Data can be edited when enclosed in brackets. Either toggle (e.g. Enabled/Disabled) by pressing any arrow
pushbutton, or individually make changes to a character when it is underlined.
[ _ ]
An underlined digit can be edited. Use the up and down arrow pushbuttons to scroll through the characters;
use the left and right arrow pushbuttons to move to the next digit.
4.2 User Interface Modes
4.2.1 Types of Interface Mode
There are two user interface modes as follows:
•
Monitor Only mode
•
Full Access mode
To change the user mode refer to the Front Panel Setup Menu. This is
found in Section 3.7 as option 6 of the
System Menu
in Chapter 3,
Operating the Equipment Locally.
Æ
View Alarm Log

Logs
È
View Event Log

Menu
Ç
Edit Config Name

Config
Æ Quit

Menu
Indicates there are more
selections available.
Use the up and down
arrow pushbuttons to
scroll up and down.
Indicates the current
selection. Press Enter
to access the next
level menu, or to enter
Edit Mode.