TANDBERG SM6610, Справочное руководство

Страница: 41 / 200

Operating the Equipment Locally
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators Page 3-3
ST.RE.E10152.2
3.1 Using Terminal Control
3.1.1 Introduction
CAUTION…
Only one logical control interface on the Modulator, i.e. Front Panel, Terminal, SNMP Remote Control,
FTP, etc, should be used at any one time. Using more than one interface simultaneously may cause
unexpected behaviour of the Modulator.
A VT100 terminal or a PC running the VT100 terminal emulation program
may be used for control and monitoring of the Modulator, or terminal
control can be used over a network using Telnet.
3.1.2 Setting up the VT100 Terminal Emulation Program
General
To use the VT100 terminal emulation program it is necessary to set the
parameters first. Follow the instructions for the Windows 3.11 or Windows
95/98/NT 4.0/XP version, as appropriate.
Windows 3.11
To configure the parameters for the VT100 terminal emulation program
using Windows 3.11, proceed as follows:
1. Open the Terminal program which is part of Windows 3.11.
2. Select the Settings menu and choose the Communications option
(see Figure 3.1).
Figure 3.1: Communications Screen
Required settings:
Baud Rate = 19200
Data Bits = 8
Stop Bits = 1
Parity = none
Flow Control = none
Set all others as required
.