TANDBERG SM6610 Скачать руководство пользователя страница 4

Страница: 4 / 200

Preliminary Pages

Page iv

Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators

ST.RE.E10152.2

Chapter 10: Licence Keys

Provides information on how to obtain Licence Keys and how to enter them

by FTP.

Annex A: Glossary
Annex B: Technical Specification

About this Reference Guide

This Reference Guide provides instructions and information for the

installation and operation of the SM6610, SM6615, SM6620 and SM6625

Satellite Modulators.
This Reference Guide should be kept in a safe place for reference for the

life of the equipment. It is not intended that this Reference Guide will be

amended by the issue of individual pages. Any revision will be by a

complete reissue. Further copies of this Reference Guide can be ordered

from the address shown on page vii. If passing the equipment to a third

party, also pass on the relevant documentation.
Issues of this Reference Guide are listed below:

Issue Date Software

Version

Comments

Jun 2004

1.1

Initial Issue

2 Jan

2005

2.0

Updated for software v2.0, which supports transport stream rate
adaptation.

The following manuals are also associated with this equipment:

•

ST.US.E10152: User Guide

•

ST.TS.SNMP.E10152: SNMP Remote Control

•

ST.RE.PREKOR.E10154: Reference Guide for the PREKOR Software

Option for SM6620 and SM6625 Satellite Modulators

General

All best endeavours have been made to acknowledge registered

trademarks and trademarks used throughout this Reference Guide. Any

notified omissions will be rectified in the next issue of this Reference

Guide. Some trademarks may be registered in some countries but not in

others.
Registered trademarks and trademarks used are acknowledged below and

marked with their respective symbols. However, they are not marked

within the text of this Reference Guide.

Registered Trademarks

Ethernet

is a registered trademark of Xerox Corporation.

Trademarks

VT™ is a trademark of Digital Equipment Corporation.
Windows™ and Windows NT™ are trademarks of Microsoft Corporation.
PREKOR™ is a trademark of TANDBERG Television Limited.

Содержание SM6610









































































































































































































Результаты поиска

Содержание SM6610

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG SM6610, Справочное руководство

Результаты поиска

Содержание SM6610

Отзывы:

Бренды по названию

Популярные бренды