TANDBERG SM6610, Справочное руководство

Страница: 106 / 200

RS-232 Remote Control Protocol
Page 5-6 Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
ST.RE.E10152.2
5.2.4 Upload Current Configuration
Sending this message retrieves the current configuration from the
Modulator.
Table 5.5: Upload Current Configuration
Type
0x74
Length
0
5.2.5 Download Configuration
This message downloads and activates (so becoming the current
configuration) a configuration to the Modulator. The configuration structure
can be upgraded by defining a new protocol version number and adding
the extra fields required at the end of the message.
Table 5.6: Download Configuration
Type 0x70
Length Depends on protocol version Size
Value Protocol Version 0x00 - 0xFF
(See Section 5.8 Protocol Version) 1
Input Select 0x00 - SPI
0x01 - ASI 1
0x02 - Reserved
0x03 - ASI 2
0x04 - ASI 3
0x05 - ASI 4
0x10 - Test packets (Null)
0x11 - Test packets (PRBS) 1
Reserved Set to 0x00 1
Packet Size 0x00 - 204 byte
0x01 - 188 byte 1
Reserved Set to 0x00 1
Bit-rate
Set interface bit-rate, 1 bit/s increments. This value
is only used if Symbol rate is set to 0xFFFFFFFF.
Byte 1: Bit-rate bits (31..24)
Byte 2: Bit-rate bits (23..16)
Byte 3: Bit-rate bits (15..8)
Byte 4: Bit-rate bits (7..0)
e.g. 155 Mbit/s = 0x093D1CC0 4
Symbol rate
Set symbol rate, 1 symbol/s increments. This value
is used by default unless set to 0xFFFFFFFF in
which case bit-rate will be used.
Byte 1: Symbol rate bits (31..24)
Byte 2: Symbol rate bits (23..16)
Byte 3: Symbol rate bits (15..8)
Byte 4: Symbol rate bits (7..0)
e.g. 30 Msymbol/s = 0x01C9C380 4