D 13373.08
NOVEMBER 2007
MPS
TANDBERG
MPS
ADMINISTRATOR GUIDE
PRI Board
Network Configuration
NSF Telephony Number
Your network provider may require a service selection in your
ISDN configuration.
Enter the Service code here. Valid NSF service codes are
from
0
to
31
(National, AT&T or Japan/Taiwan ISDN).
NSF Telephony Mode
On:
If set to on, NSF service code for telephone calls will be
enabled.
Off:
If set to off, NSF service code will be disabled (Default:
Off).
Speech Timers
On:
If set to on, this will turn on Layer 3 timers T310, T304
and T301 for telephone calls (Default: On).
Off:
If set to off, this will turn off Layer 3 timing.
PRI Board in Slot 1-n (2:3)
NSF Video Number
Your network provider may require a service selection in your
ISDN configuration.
Enter the Service code here. Valid NSF service codes are
from
0
to
31
(National, AT&T or Japan/Taiwan ISDN).
NSF Video Mode
On:
If set to on, NSF service code for video calls will be
enabled.
Off:
If set to off, NSF service code will be disabled (Default:
Off).
PRI Board Configuration
Please ensure that
Network Type
is set to
PRI
for the
correct ISDN cards in the
PRI Network Configuration
.
!
Save
- Press the Save button to save changes.
NSF - Network Specific Facilities
Read about
in Technical Descriptions.
89
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
System
Configuration
