TANDBERG Media Processing System MPS 800, Руководство администратора

Страница: 104 / 179

D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
QoS Configuration
QoS (Quality of Service) Configuration
QoS Configuration (network 1-2)
The network must support Quality of Service (QoS) for these
settings to work. You can configure the Quality of Service
mode differently for Network #1 and Network #2.
Network Configuration
QoS Mode (network 1-2)
Precedence:
Select IP Precedence QoS method and see
QoS Mode Configuration for details.
Diffserv:
Select Diffserv QoS method and see QoS Mode
Configuration for details.
Off:
No QoS is used.
Save
- Press the Save button to save changes.
QoS Type of Service Priority
Minimum Delay:
Will choose a route where minimum delay is
prioritized.
Maximum Throughput:
Will choose the route with highest
bandwidth is prioritized.
Maximum Reliability:
Will choose the route where minimum
packet loss is prioritized.
Minimum Cost:
Will choose the cheapest connection avail-
able.
Off:
Quality of Service not active.
QoS Mode Configuration
Diffserv
•
is used to define which priority audio, video,
data and signalling packets should have in an IP network.
The priority ranges from 0 to 63 for each type of packets.
Precedence
•
is used to define which priority audio, video,
data and signalling should have in an IP network. The
higher the number, the higher the priority. The priority
ranges from 0 (Off) to 7 for each type of packets.
In addition to Precedence,
•
Type of Service
can be used
and enables the user to define what type of connec-
tion that should be chosen for the IP traffic. This helps
a router select a routing path when multiple paths are
available.
104
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices Main
System
Configuration