Tabor Electronics 5251, Руководство пользователя

Страница: 92 / 298

TE5251
User Manual
3-40
Figure 3-28, Zooming In on Waveform Segments
Wave Commands
The Wave commands let you create waveforms on the screen. The
Wave command has a library of 8 waveforms: Sine, Triangle,
Square, Sinc, Gaussian, Exponent, Pulse, Noise and dc. Also, from
the Wave command, you can create Cardiac waveforms and pulse
width modulation. Finaly, custom waveforms are created using the
Equation Editor. Information how to create waveforms using the
Wave commands is given below.
Creating Waveforms From the Built-in Library
You can create any waveform from the built-in library using the
Wave command. Clicking on one of the Wave options will open a
dialog box. An example of the Sine waveform dialog box is shown
in Figure 3-29. This dialog box is representative of the rest of the
waveforms, so other waveforms will not be described.
Creating Sine Waveforms
Use the following procedure to create sine waveforms from the
built-in library. Click on Wave, then sine… the dialog box as shown
in Figure 3-29 will appear. You can now start programming
parameters that are available in this box.
Start Point – Defines the first point where the created wave will
start. Note that if you change the start point the left anchor will
automatically adjust itself to the selected start point. The example
shows start point set at point 0.