Tabor Electronics 5251, Руководство пользователя

Страница: 105 / 298

3
ArbConnection
Generating Waveforms Using the Equation Editor
3-53
Step 3 – Write and compute the original equation:
Amplitude(p)= c:/Sine.wav*sin(omg*p*5)*c:/Noise.wav/10
If you did not make any mistakes, your waveform screen should
look as shown in Figure 3-38
Figure 3-38, Combining Waveforms into Equations
The Pulse Composer
The Pulse Composer is a great tool for creating and editing pulses
without the need to think about sample clock, number of points and
complex equations. Pulses are created on the screen, simply and
efficiently in a special dialog box by typing in the width and level, or
by using the “rubber band” method to place straight line segments
with the exact amplitude and time duration. The pulse composer
can also multiply pulse sections to create pulse duplication along
lengthy time intervals.
When you finally have your pulse design on the screen the program
determines if the pulse design will fit in one memory segment or use
multiple segments and employ the sequence generator for
repeatable segments. In either case, bear in mind that if you
already have some waveforms stored in memory segments, these
will be erased to make room for the new pulse design. If you insist
on keeping arbitrary waveforms and still download complex pulses,