Tabor Electronics 5251, Руководство пользователя

Страница: 118 / 298

TE5251
User Manual
3-66
Pulse Example, Section 2 The first pulse section is complete. We are ready now to start
building the second section of the pulse as shown in Figure 3-48.
Point and click on the Edit command and select the Append Section
option. A new section number will appear but it will show empty
next to the section identifier.
Before you start entering values to this section, note that there are
linear transitions required for this section. Therefore, select the
Time/Level Points option in the Pulse Train Design Format. You are
now ready to start programming values. In case you made a
mistake and want to switch design formats after you have already
typed in some values, the Pulse Editor will show an error alerting
you that design format can only be changed for empty section. In
this case, the only way to recover is to delete all entries and start
from an empty index list. Type the section entries as shown in
Figure 3-44.
Pulse Example, Section 3 The second pulse section is complete. We are ready now to start
building the third section of the pulse as shown in Figure 3-44. Point
and click on the Edit command and select the Append Section
option. A new section number will appear but it will show empty
next to the section identifier.
Before you start entering values to this section, note that there are
fast transitions required for this section. Therefore, select the DC
Intervals option in the Pulse Train Design Format. You are now
ready to start programming values. In case you made a mistake
and want to switch design formats after you have already typed in
some values, the Pulse Editor will show an error alerting you that
design format can only be changed for empty section. In this case,
the only way to recover is to delete all entries and start from an
empty index list. Type the section entries as shown in Figure 3-49.