T-Comfort 930 DSL, Руководство пользователя

Страница: 30 / 152

28
Installation Available Ports
The software of the T-Comfort 930 DSL can detect the type of interface card present. The interface card must
still be configured individually for commissioning.
You can query the status of the interface cards in the Web console when the T-Comfort 930 DSL is opera-
tional again. To do this, call up the PBX Configuration: Ports: Slots menu page. The Status column of the
table displays a green tick beside the slot name ( 0/1 , 0/2 and 0/3 ). The column of the table must list the
correct type of interface card.
Available Ports
The T-Comfort 930 DSL has the following ports (see also Positions of the Ports starting on page 30):
T-Comfort 930 DSL Version 1
The listed interfaces and ports are located on the basic module of the T-Comfort 930 DSL Version 1. Further
interfaces and ports can be added by installing the expansion set and additional interface cards (see
Installing an Expansion Set starting on page 22 and Installing Interface Cards starting on page 25).
■
One S
0
port to connect to an external S
0
bus (usually the NTBA), designed as an RJ45 jack (S
0
1)
■
One switchable S
0
port (S
0
2), which can be connected as either an internal or external S
0
bus. The
internal connection is via a pressure terminal and the external connection via an RJ45 jack.
■
Three U
pn
ports, designed as pressure terminals (U
pn
1 to U
pn
3)
■
Four analogue a/b ports, designed as pressure terminals (a/b1 to a/b4)
■
One slot to incorporate a doorstation equipment module. The following ports can be used with such a
card:
two actor ports for connection to a door opener and the intercom of doorstation equipment. These are de-
signed as pressure terminals (actor1 to activate a door opener and actor2 to activate doorstation equip-
ment);
three sensor ports for connection to the bell keys of doorstation equipment, designed as pressure termi-
nals (sensor 1 to sensor 3)