T-Comfort 930 DSL, Руководство пользователя

Страница: 119 / 152

117
Synchronising the PC Clock Configuring the PC Software
Synchronising the PC Clock
With the network service SNTP (simple network time protocol) it is possible to synchronise the internal clock
of a PC with the time of the T-Comfort 930 DSL.
Requirements
You must enter the time zone so that the T-Comfort 930 DSL can calculate the time of the internal clock back
to the GMT (Greenwich Mean Time) required for SNTP:
1. Go to the Configurator, SYS Configuration: System menu. Click on Change .
2. Under Internet time (SNTP) , enter the Time zone for which the time of the T-Comfort 930 DSL applies
and whether summer time is allowed for. Confirm this with Assign .
Configuring SNTP
For various operating systems, you can use one of the numerous SNTP programmes offered for downloading
on the Internet. Configure the T-Comfort 930 DSL as an SNTP server for such programmes.
SNTP with Windows 2000
Here you configure the SNTP server as follows:
1. Log on as the administrator. Start the Command Prompt under Start : Programs : Accessories .
2. Enter the command line “net time /setsntp:192.168.99.254”. Confirm with the enter key. This command
changes the setting for the SNTP server address in the system registry. Close the command line.
3. Open the Services dialogue under Start : Settings : Control Panel : Administration . Set the autostart type
of the Windows Timer service to Automatic . Start the service with Process : Start . Every time the service
starts, the PC clock is synchronised with the time of the T-Comfort 930 DSL.
S
Please note: In a Windows domain network, the PDC server (primary domain control-
ler) should automatically assume the function of the timer.
SNTP with Windows XP
Here you configure the SNTP server by double-clicking on the time in the Start bar. Enter the T-Comfort
930 DSL as the Server in the Internet time tab.