T-Comfort 930 DSL Скачать руководство пользователя страница 135

Страница: 135 / 152

133

Telephony

Frequently Asked Questions

One of the features (e.g. call

diversion) on one of the

telephones cannot be used even

though the feature has been

configured in the Configurator of

the T-Comfort 930 DSL.

Make sure the user configured for this telephone belongs to a user

group that has access to this feature (

Configurator

User Manager:

User

and

User groups

menus). Some features cannot be used until

the system PIN is changed.

Nothing is indicated on the display

of one of the connected ISDN

telephones.

You have connected the ISDN telephone to an external S

port (RJ-

45 socket). These ports are intended for connection to the NTBA

only. Connect the telephone to an internal S

port (pressure ter-

minal).

Calls can be made but not

received with one of the ISDN

telephones.

The internal call number that has been configured for this ISDN tele-

phone in the

Configurator

(

PBX Configuration: Ports: S0

menu)

must also be configured as an MSN on the ISDN telephone itself.

For further information, refer to the User Guide of your ISDN tele-

phone.

An ISDN telephone always rings, if

another telephone on the S

bus is

being called.

This case also requires configuring the MSN on the ISDN telephone

(see above answer).

It is not possible to configure

Call Distribution: Outgoing for

multi-terminal access.

You have configured multi-terminal access and system access in

parallel. All outgoing calls are therefore established via system

access, and outgoing call distribution can be configured for system

access only (

Configurator

Call Distribution

menu).

A specific MSN can be seized for individual calls by means of a

code number procedure. For further information, refer to the “Oper-

ation on Standard Terminals”user guide.

What are some of the causes for

problems when sending and/or

receiving faxes?

In frequent cases, the reason may be found in a problem with the

ISDN-L1 reference clock distribution. The L1 clock is delivered from

the network provider. An unclean L1 clock distribution and the intro-

Содержание 930 DSL

























































































































































Результаты поиска

Содержание 930 DSL

Отзывы:

Похожие инструкции для 930 DSL

Бренды по названию

Популярные бренды

T-Comfort 930 DSL, Руководство пользователя

Результаты поиска

Содержание 930 DSL

Отзывы:

Похожие инструкции для 930 DSL

Бренды по названию

Популярные бренды