T-Comfort 930 DSL, Руководство пользователя

Страница: 137 / 152

135
LAN Frequently Asked Questions
The startup procedure of the
T-Comfort 830/
Comfort Pro CB 300 take a long
time? What is the reason?
This behaviour may indicate a problem with the reference clock.
Refer also to What are some of the causes for problems when
sending and/or receiving faxes? starting on page 133.
LAN
Why is it not possible to establish a
network connection with the
T-Comfort 930 DSL?
Check whether the LEDs for the switch and the PC’s network card
are indicating a connection.
Check the LEDs for the LAN functions of the T-Comfort 930 DSL.
The green LAN LED at the top indicates whether the network cable
has been properly connected. The red LAN LED indicates whether
there is any network traffic on the line.
If you have installed an add-on module, also check the LAN LEDs of
the Ethernet switch. The Ethernet line between the basic module
(LAN port) and the add-on module (LAN1 port) are properly con-
nected if the centre LED lights up. The Ethernet line between the
hub of the corporate network and the LAN0 port is properly con-
nected if the right-hand LED lights up.
To check whether there is a network connection with your T-Comfort
930 DSL, enter the “ping IP address” command in “Run” in the
Windows Start menu (e.g. ping 192.168.99.254).
How can I determine the IP
address of the T-Comfort
930 DSL?
To find out what the IP address is, enter the code number
*182
on one of the connected system telephones.
The code-number procedure
*183
also displays the
network mask.
The network connection is
functioning, but nothing is
displayed in the browser.
Enter the complete IP address of the T-Comfort 930 DSL along with
the protocol identifier, for example http://192.168.99.254/.