T-Comfort 930 DSL, Руководство пользователя

Страница: 12 / 152

10
Features
■
the T-Comfort 930 DSL expansion module with additional interface cards provides up to eight further S
0
ports (switchable between internal/external). An overview of the available cards can be found under
Interface Cards starting on page 31,
The firmware of the T-Comfort 930 DSL is designed for configuring up to 300 users.
You can connect the following devices to the T-Comfort 930 DSL:
■
analogue terminals
■
Euro-ISDN terminals
■
T-Comfort 630, T-Comfort 730 and T-Comfort 830 system telephones
■
Comfort Pro P 100, Comfort Pro P 300 and Comfort Pro P 500 system telephones
■
T-Comfort 730 DECT base stations
■
T-Comfort 830 handsets/Comfort Pro CM 300 handsets (via a T-Comfort 730 DECT base station on the
DECT-enabled U
pn
port of an interface card)
An S
0
port can be used by Euro-ISDN terminals working in accordance with DSS1.A U
pn
port is suitable for
the T-Comfort 630/730/830 Comfort Pro P100/300/500 system telephones. T-Comfort 730 DECT base sta-
tions can also be connected to the DECT-enabled U
pn
ports on interface cards. An analogue port is used by
standard analogue devices.
If the CNIP (calling name identification presentation) feature is supported by your network provider, the latter
will show you the name of callers in addition to their number for each incoming trunk call. The T-Comfort
930 DSL supports the display of the name on system telephones. However, if you have created an entry in the
telephone book of the T-Comfort 930 DSL under the number of the caller, this will be displayed instead.
The T-Comfort 930 DSL can be integrated into an existing network (LAN) and be used by all workstations as
an Internet access router and mail client.
Configuration and programming of the T-Comfort 930 DSL is performed by means of a special Web browser
(known as the “Web console”), which can be run on a connected PC.
The T-Comfort 930 DSL can be configured and maintained from the T-Com service centre via remote access.
A PC can be connected via a retrofitted V.24 module (only possible on the T-Comfort 930 DSL version 1) to
the COM port for the purpose of configuring the system or transferring connection data.