T-Comfort 930 DSL, Руководство пользователя

Страница: 27 / 152

25
Installing Interface Cards Installation
Installing Interface Cards
The expansion module and the basic module of the T-Comfort 930 DSL Version 1 can be expanded using
interface cards.
S
Please note: Turn off the T-Comfort 930 DSL. Unplug the plug-in power supply and
the main supply from the socket. You must not install or uninstall interface cards while
the T-Comfort 930 DSL is turned on.
V.24 and Doorstation Equipment Slots
Slots on the basic module
(only T-Comfort 930 DSL Version 1)
The T-Comfort 930 DSL Version 1 has two smaller slots in which special interface cards can be operated
(V.24 and doorstation equipment). You can see the location of these slots in the diagram entitled Position of
the ports on the basic module (T-Comfort 930 DSL Version 1) .
■
The doorstation equipment module provides two “actor” ports and three “sensor” ports.
■
The V.24 module provides a serial port.
Proceed as described below to install one or both of these interface cards:
1. Turn off the T-Comfort 930 DSL. Open the housing cover.
V.24
Doorstation
equipment