T-Comfort 930 DSL, Руководство пользователя

Страница: 65 / 152

63
Configuring the T-Comfort 930 DSL Configuration
3. The basic settings switch is designed as a key switch. The location of the switch can be found in the
chapter entitled Interface Cards starting on page 31. Press and hold the switch.
4. Replace the power plug in the mains socket. Wait about 30 seconds until the indicator on the front of the
T-Comfort 930 DSL constantly flashes.
5. Disconnect the power plug from the mains socket again.
6. Release the key switch.
The system data is now reset.
7. Replace the power plug in the mains socket.
The T-Comfort 930 DSL will now reboot in the default configuration. The procedure is completed when all
connected system terminals show the time on their displays.
8. Log on to the Web console (see Starting the Web Console on page 57). Configure the T-Comfort
930 DSL (possibly by loading a saved configuration; see Saving and Loading the Configuration on
page 60 ).
Generating Your Own MoH Files
The T-Comfort 930 DSL comes with an internal MoH file for Music on Hold. The T-Comfort 930 DSL product
CD contains a number of MoH files with different volume levels, which you can load at a later time as nec-
essary.
The file format for non-resident Music on Hold is *.wav. You can also save your own MoH in a *.wav file and
load it into the T-Comfort 930 DSL.
If you have a Windows operating system, you can use the “Sound Recorder” program to generate your own
MoH file. This program is usually located in the Windows directory called “Multimedia”.
The MoH file must be coded with 8000 Hz, 8 bit mono in accordance with CCITT, A-Law. This coding is
required for the T-Comfort 930 DSL and can be set in the “Sound Recorder” when you save the file under
Format (CCITT, A-Law) and Attributes (8000 Hz, 8 bit mono). The maximum allowable size for a MoH file is