T-Comfort 930 DSL, Руководство пользователя

Страница: 16 / 152

14
Factory Settings on Delivery Telephony Functions
Factory Settings on Delivery
The following basic settings and features are active on delivery. We recommend that you configure the
T-Comfort 930 DSL to your individual requirements before putting it into operation (see Configuration
starting on page 53).
The factory settings apply to smallest version of the T-Comfort 930 DSL (only with the basic module). If an
expansion module with interface cards exists, the additional interfaces are initially unconfigured. You must
therefore first configure the slots of the expansion module to commission the interfaces.
Telephony Functions
■
The S
0
1 port is configured as a multi-terminal connection, and the S
0
2 port as a system port.
■
System telephones with the telephone numbers 30 to 32 are configured on the three U
pn
ports.
■
Analogue terminals with the telephone numbers 10 to 13 are configured on the four a/b ports.
■
The T-Comfort 930 DSL is configured ready for operation in Germany.
■
Analogue devices: The dialling mode (pulse dialling or DTMF) is automatically detected.
■
All corded terminals connected to the basic module ring when there are incoming external calls.
■
The system PIN, for example for remote-programmable call diversion, is set at “0000”.
Authorisations
The use of functions by a terminal on the T-Comfort 930 DSL is regulated by means of authorisations. Author-
isation is configured by means of user groups to which the users with their terminals are then assigned.
Three user groups are preset: “Administrators”, “Standard” and “Guests”. “Administrators” have access to all
functions of the T-Comfort 930 DSL and unrestricted configuration rights. Users in the “Guests” group cannot
configure the T-Comfort 930 DSL, are not able to make external calls, and have only restricted use of the ter-