T-Comfort 930 DSL Скачать руководство пользователя страница 18

Страница: 18 / 152

Factory Settings on Delivery

Authorisations

■

The “call queue” function is deactivated.

■

Call forwarding to internal or external numbers can be activated. Call forwarding after delay is executed

after 20 seconds. Door calls and MSN groups can be forwarded. Call forwarding for other users and call

forwarding by other users are deactivated.

■

It is possible to transfer an external call to an external subscriber.

■

Three-party conferences can be set up.

■

Connections can be parked.

■

Call protection can be activated, call-waiting protection, announcement protection and pick-up protection

can not be activated.

■

Transmission of one’s own phone number (MSN or system access number) can be suppressed on a per-

call basis.

■

The telephone lock can be activated. The terminal PIN is “0000”.

■

Interception of “malicious” callers is possible if this feature has been ordered from the network operator.

■

The white list, black list and call filters are not preconfigured and thus not active. If these lists are con-

figured, they can be activated for the user groups. A special list with emergency telephone numbers is

preset and activated.

■

Call lists on terminals list internal calls, external calls, calls from the door and calls that the user received

while they were telephoning.

■

Function keys can be programmed on system telephones, no keys are locked.

■

The evaluation of connection data by external cost-recording programs is deactivated.

■

The cost multiplier is set to 100%, i.e. the costs are not multiplied by any factor. There are no preset basic

amounts for the charging of calls.

■

Speed dialling is possible if this has been configured in the T-Comfort 930 DSL central telephone book.

■

Keypad dialling can be used.

■

The door opener can be activated from all terminals. Door calls can be forwarded.

■

Time control is not active as there are no time groups configured.

Содержание 930 DSL

























































































































































Результаты поиска

Содержание 930 DSL

Отзывы:

Похожие инструкции для 930 DSL

Бренды по названию

Популярные бренды

T-Comfort 930 DSL, Руководство пользователя

Результаты поиска

Содержание 930 DSL

Отзывы:

Похожие инструкции для 930 DSL

Бренды по названию

Популярные бренды