Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0, Руководство пользователя

Страница: 465 / 503

Deployment Solution 465
System Jobs for Deployment Solution
reboots the client so that DOS will recognize the newly created DOS partition. It then
calls
RH7SETUP to copy the basic RedHat files that facilitate a RedHat Kickstart install. It
then runs
RDeploy
to create a disk image of the now populated DOS partition.
Steps to use
1. Make a copy of the sample job.
2. Edit the last Run Script task, Create Red Hat Install Disk Image , and change
the
SET ImageName=F:\IMAGES\RH71_FTP.IMG
line to the name of the image
you wish to create.
3. Change the name of the job to reflect the desired purpose (optional).
4. Assign the job to a computer or computer group.
Create RH7 Install Disk Image (Target HD)
Description Creates a disk image to be used for installing RedHat Linux (v7.1 or later)
through the hard disk install method (where files are installed from the local hard drive).
Additional files required
z
<DS install path>\IMAGES\DOS_ONLY.IMG. DOS_ONLY.IMG
is an image file
containing a simple bootable partition provided during the product install.
z
RedHat operating system files (REDHAT and DOSUTILS directories from the RedHat
CD). These files need to be copied from the RedHat CD to the
<install
path>\DEPLOY\CDS\REDHAT\RH71\REDHAT
and
<install
path>\DEPLOY\CDS\REDHAT\RH71\DOSUTILS
directories, respectively.
z
<DS install path>\SAMPLES\SCRIPT~1\REDHAT\RH7SETUP.BAT.
DOS
batch file that the job calls to copy the RedHat operating system files needed for the
target hard drive install.
What this task does : This job creates a hard drive image that can later be used for
installing RedHat Linux v7.1 through the Hard Disk install method. It downloads the
DOS_ONLY
image to the selected client. This creates a 2 Gig FAT16 DOS bootable
partition. It reboots the client so that DOS will recognize the newly created DOS
partition. It calls
RH7SETUP.bat
to copy the basic RedHat files that facilitate a RedHat
Kickstart install. It also copies the RedHat operating system files to the target's hard
drive in the
C:\REDHAT
directory. It runs
RDeploy
to create a disk image of the now
populated DOS partition.
Steps to use
1. Make a copy of the sample job. Edit the last Run Script task, Create Red Hat
Install Disk Image , and change the
SET
ImageName=F:\IMAGES\RH71_HD.IMG
line to the name of the image you wish to
create.
If you copied the RedHat operating system files to a location other than
<DS
install path>.\DEPLOY\CDS\REDHAT\RH71
, edit the second Run Script task ,
Copy RedHat Files to Hard Drive , and specify the location on the
SET
OSFilesPath=
line.
2. Change the name of the job to reflect the desired purpose (optional).
3. Assign the job to a computer or computer group.