Altiris Deployment Solution™ from Symantec User’s Guide
158
Linux (RDeploy).
Select this option to run the RDeploy in Linux mode.
You can select the ImageX or Mac Image option for imaging. If you select ImageX,
the image is created as a .WIM file. If you select Mac Image, the image is created as
a .DMG file. For information on creating a Mac Image, see
Creating a Mac image
on
page 159.
You can also select the Ghost option for imaging. If you select Ghost, the image is
created as a .GHO file. For information on creating a Ghost Image, see
Creating a
Ghost image
on page 160.
Important
Linux (RDeploy) and Ghost options are available only when the ImageTools.ini file is
stored in the eXpress folder.
4. Enter additional parameters in the
Additional Parameters
field.
You can add command-line options specifically for the RapiDeploy program to run
imaging tasks. See
Command-line Switches
in the
Deployment and Migration Guide
.
5. Enter a path and file name to store the disk image file. You can store image files to
access later when a managed computer is assigned a job that includes the image
file.
The default file name extension is .IMG. Saving image files with an .EXE extension
converts them into self-extracting executable files (the run-time version of
RapiDeploy is added in the file). You can also save ImageX files with a .WIM
extension, a Mac image with a .DMG extension, and a Ghost image with a .GHO
extension.
If WinPE is used, Deployment Solution supports UNC and DFS paths in the
Name
field. For example, you can type \\My_Server\My_Volume\myimagefile.img in the
Name
field.
6. Select
Disable image path validation
if you want to store the image file outside
of the Deployment Share file structure. If you do not select this option and do not
specify a Deployment Share path, a warning message appears, reminding you to
configure your automation process to use the path indicated in the
Name
field. You
can still save your image to a location outside of the Deployment Share file structure
even when you do not select this option. This option only eliminates the warning
message. You can use this option to store images locally on the managed
computer's hard drive or to an additional server used to store images.
If you typed a UNC path in the
Name
field and the server does not have access to
the path, check to disable image path validation. Otherwise, the process fails.
When storing images locally on the managed computer's hard drive, ensure that
you enter the path relative to the managed computer (Example: C:\myimage.img).
When you store an image locally on a managed computer instead of a file server,
you save server disk space and reduce network traffic.
Prerequisite:
To store images locally on the managed computer’s hard drive, you
must have a hidden automation partition installed on the managed computer's hard
disk with the required disk space to hold the images you want to store.
Caution
When imaging computers where images are stored on the managed computer’s
hidden automation partition, use the option to remove the automation partition only
when you want to clear all images from the computer.
Содержание ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0
Страница 1: ...Altiris Deployment Solution 6 9 SP4 from Symantec Admin Guide ...
Страница 40: ...Deployment Solution 40 What is Automation z Which Automation Operating System Should I Use page 44 ...
Страница 144: ...Altiris Deployment Solution from Symantec User s Guide 144 ...
Страница 371: ...Altiris Deployment Solution from Symantec User s Guide 371 ...
