Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0, Руководство пользователя

Страница: 159 / 503

Altiris Deployment Solution™ from Symantec User’s Guide 159
7. Select Prepare using Sysprep to use Sysprep to prepare the system for imaging.
8. From the Operating System drop-down list, select the operating system or Add
new to open the OS Product Key dialog and select the OS Information.
9. Click Advanced Settings . This opens the Sysprep advanced settings dialog. See
Advanced Sysprep settings for creating a disk image on page 161.
10. (Optional) Select the Do not boot to Production option to create an image of the
hard disk while booted to Automation without first booting to Windows to save
network settings (TCP/IP settings, SID, computer name, and so on). If you select
this option, these network settings are not reapplied to the computer after the
imaging task, resulting in network conflicts when the computer starts.
11. From the Automation pre-boot environment (DOS/WinPE/Linux) drop-down
list, select the required pre-boot environment to perform the Create Disk Image
task in the selected pre-boot environment. By default, the Default Automation
(Auto-select) type is selected.
Note
ImageX requires a WinPE x86 pre-boot environment.
12. (Optional) To select Media Spanning and additional options, click Advanced . See
Create disk image advanced on page 162.
13. Click OK (if you are using the New Job Wizard) or click Next .
14. (Optional) Set Return Codes. See Setting up return codes on page 193.
15. Click Finish . The task appears in the Task list for the job. The disk image is created
when you run this task.
Tip
If an imaging job fails on a managed computer, the Deployment Agent
Configuration page appears on the client computer. This page displays a prompt to
confirm whether the user wants to configure the client computer or restore the
original settings. On the client computer’s screen, select
Cancel > Restore
Original Settings .
See also Deployment tasks on page 155.
Creating a Mac image
You can create a Mac Image using the Create Disk Image task.
To create a Mac image
1. In the Create Disk Image dialog, select Mac Image (*.dmg) from the Imaging
Tool drop-down list.
2. (Optional) Provide the disk number in the Additional Parameters field using the
following format:
-d[disk#]
By default, all partitions of disk 1 are imaged. To image a different disk, provide the
disk number in the
Additional Parameters field using the same format.
3. Choose from one of the following options to add the path and file name for the disk
image: