Svantek SVAN 979 Скачать руководство пользователя страница 28

Страница: 28 / 377

SVAN 979 User Manual

advanced alarms settings) are stored in the predefined SYSTEM directory. The predefined directories can be
reassigned or renamed by the user.

The

SD Card

memory is activated automatically after insertion of the card. The manual activation of the

USB Disk

is needed.

The instrument current settings are stored in the instrument internal RAM. This file can be downloaded to the
PC as

Settings.svt

with the use of + software. It can be edited with the special

Setup file editor

tool

of + and uploaded to the instrument’s internal RAM (see

+ User Manual

The type of the selected memory

shows the icon at the top left-hand corner of the display.

“SD card”

icon is displayed when external SD card memory is assigned for file saving. Micro SD

card is connected.

“USB disk”

icon is displayed when the USB disc is assigned for file saving. USB disc is connected

and activated.

If the SD card and USB

disc are removed from the memory slot the “memory warning” icon appears

instead of “SD card” or “USB disc” icon.

USB Disc activation

USB disc activation is performed in the

Communication Ports

window of the

Instrument

section (

path: <Menu> / Instrument / Communication Ports

Activation of the USB disk can also be done
in the

File Manager

window. The user

should select the

USB Disk

position and

press the

<ENTER>

push-button. Then in

the

Command

list

select

the

Activate

USB Host

position and press the

<ENTER>

push-button again.

<ENT>

The

SD Card

and

USB Disk

memories are organised as a standard memory with directories and sub-

directories (FAT32 file system). It is possible to create and delete the directories from the instrument level.

The content of the instrument’s memory can be controlled with the help of the

File Manager

Setup Manager

function of the

File

section.

In the

File Manager

Setup Manager

screens, data files are described by their file
name with an extension (

SVL

SVT

WAV

)

as well as additional icon and size (

2KB

etc.).

Содержание SVAN 979

























































































































































































































































































































































































Результаты поиска

Содержание SVAN 979

Отзывы:

Бренды по названию

Популярные бренды

Svantek SVAN 979, Руководство пользователя

Результаты поиска

Содержание SVAN 979

Отзывы:

Бренды по названию

Популярные бренды