Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2954 / 3086

IMMOBILIZER CONTROL SYSTEM 8G-19
DTC B3061 TRANSPONDER COMMUNICATION FAIL
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION TROUBLE AREA
No response from transponder.
Secret key is not matched between ignition key
(transponder)
FIX CODE does not match with registered one.
FIX CODE is not registered in immobilizer control module.
Ignition key with built-in transponder internally faulty
Secret key is not registered in transponder
Secret key is not registered in ECM
Secret keys are different between ECM and transponder
Unregistered ignition key with built-in transponder FIX
CODE is detected
No FIX CODE in immobilizer control module
TROUBLE SHOOTING (DTC B3061)
STEP ACTION YES NO
1 Is DTC B3060 also output? Proceed DTC FLOW
TABLE of DTC B3060.
Then go to step 2.
Go to step 2.
2 Is DTC B3055 also output? Proceed DTC FLOW
TABLE of DTC B3055.
Then go to step 3.
Go to step 3.
3 Check scan tool DATA LIST “ TRANS SKC ” .
Is it REGISTERED?
Go to step 5. Go to step 4.
4 1) Register SKC by performing REGI SKC/FC.
2) Check DTC.
Is DTC B3061 still output?
Go to step 5. Register SKC and
recheck.
5 1) Register SKC and PWD to ECM by referring
PROCEDURE AFTER ECM REPLACEMENT.
2) Check DTC.
Is DTC B3061 still output?
Go to step 6. If there is other DTC,
proceed the DTC FLOW
TABLE.
6 1) Replace ignition key with new one and register
it by referring HOW TO REGISTER IGNITION KEY.
2) Check DTC.
Is DTC B3061 still output?
Substitute a known-good
immobilizer control module
according to PROCEDURE
FOR IMMOBILIZER
CONTROL MODULE
REPLACEMENT and
recheck.
If there is other DTC,
proceed to DTC FLOW
TABLE.
DTC B3077 READ-ONLY TRANSPONDER DETECTED
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION TROUBLE AREA
Transponder for other system is detected. Ignition key with transponder
TROUBLE SHOOTING (DTC B3077)
STEP ACTION YES NO
1 1) Ignition switch at OFF position and leave it for
5 seconds or more.
2) Pull out ignition key and reinsert it.
3) Turn ignition switch to run engine.
Does engine start?
Temporary error in reading.
Immobilizer control
system is in good
condition.
Replace ignition key with
built-in transponder.
Register transponder
according to
TRANSPONDER
REGISTRATION.
2
Check ignition key for shape by referring to figure.
Is it the original one?
Check ignition key referring
to PRECAUTIONS IN
HANDLING IMMOBILIZER
CONTROL SYSTEM
and repair or replace.
Ignition key with built-in
transponder unusable.
Replace, register it if
necessary and recheck.
Fig. for step 2