Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2585 / 3086

6C-14 ENGINE FUEL
Before
disconnecting,
blow off
dust, etc.
of this portion
with compressed
air.
Pipe
Quick
joint
1
FUEL PUMP ASSEMBLY (WITH FUEL FILTER,
FUEL LEVEL GAUGE, FUEL PRESSURE
REGULATOR AND FUEL CUT VALVE)
WARNING:
Refer to the WARNING at the beginning of ON-VEHICLE
SERVICE in this section.
CAUTION:
Do not disassemble fuel pump assembly. Disassembly will
spoil its original performance.
REMOVAL
1) Remove fuel tank from vehicle. Refer to FUEL TANK REMOVAL
in this section.
2) Disconnect fuel breather hose (1), fuel vapor hose (2) and fuel
feed hose (3) from fuel pump assembly.
When disconnecting joint of fuel feed line from pipe, unlock joint
by inserting special tool between pipe and joint lock first.
Special Tool
(A): 09919-47020
3) Remove fuel pump assembly (1) from fuel tank.
CAUTION:
Never reuse fuel pump gasket (2), or fuel leak may occur.
INSPECTION
Check fuel pump assembly for damage.
Check fuel suction filter (1) for evidence of dirt and contamination.
If present, replace or clean and check for presence of dirt in fuel
tank.
For inspection of fuel pump itself and fuel pressure regulator, refer
to Section 6E of this manual.
For inspection of fuel level gauge, refer to Section 8C of this manu-
al.