Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2831 / 3086

5. Fail valve No.2
6. Key (short)
7. Key (long)
1. Upper valve body
3. Lock-up control valve
4. Lock-up signal valve
7B-100 AUTOMATIC TRANSMISSION (4 A / T)
Reference
Primary regulator valve spring (compression spring)
Spring Free length “a” (mm)
Outside diameter “b”
(mm)
Primary regulator
valve spring
79.2 18.0
Lock-up control
valve spring
31.1 8.5
Lock-up signal
valve spring
36.1 8.5
Assembly
1) Apply A/T fluid to each valve, plate washer, spring, plunger,
sleeve and key.
Insert primary regulator valve (2) about half way then place plate
washer and spring. Push in primary regulator valve ass’y all the
way in. Insert plunger with sleeve and hold them with the key.
NOTE:
!
Note the location of the key shown in picture.
!
Compression spring has a identification color paint of
yellow.
!
Note the direction of the primary regulator valve.
2) Apply A/T fluid to each valve, sleeve spring, plug and key and
insert them, then fix them with the key.
NOTE:
Note the direction of the fail valve.
3) Install oil strainers (1) and put steel balls (2).
NOTE:
Clean oil strainer before installing.