Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2594 / 3086

ENGINE AND EMISSION CONTROL SYSTEM 6E-7
11. Intake manifold surge tank
FUEL DELIVERY SYSTEM
The fuel system consists of fuel tank (1), fuel pump (2) (with built-in fuel filter (3) and fuel pressure regulator (4)),
delivery pipe (5), injectors (6) and fuel feed line (7).
The fuel (8) in the fuel tank (1) is pumped up by the fuel pump (2), sent into delivery pipe (5) and injected by the
injectors (6).
As the fuel pump assembly is equipped with built-in fuel filter (3) and fuel pressure regulator (4), the fuel (8) is filtered
and its pressure is regulated before being sent to the delivery pipe (5).
The excess fuel from fuel pressure regulation process is returned back (9) into the fuel tank.
Also, fuel vapor generated in fuel tank is led through the fuel vapor line (10) into the EVAP canister (12).
FUEL PUMP
An in-tank type electric pump has been adopted for the fuel pump
(1). Incorporated in the pump assembly are;
!
Tank pressure control valve (2) which keeps the pressure in the
fuel tank constant, and prevents the fuel from spouting and tank
itself from being deformed.
!
Relief valve (3) which prevents the pressure in tank from rising ex-
cessively.
!
Fuel cut valve (4) which closes as the float rises so that the fuel
will not enter the canister when the fuel level in the tank rises high
depending on the fuel level in the tank and the vehicle tilt angle.
Also, a fuel filter (5) and a fuel pressure regulator (6) are included
and a fuel level gauge (7) is attached.
Addition of the fuel pressure regulator (6) to the fuel pump makes
it possible to maintain the fuel pressure at constant level and ECM
controls compensation for variation in the intake manifold pressure.