Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2055 / 3086

1. Thickness gauge
IN
EX
Proper Engine Oil Viscosity Chart
PREFERRED
1, (a)
0B-6 MAINTENANCE AND LUBRICATION
ITEM 1-2
Camshaft Timing Belt Replacement
Replace belt with new one. Refer to SECTION 6A1 for replacement
procedure.
CAUTION:
!
Do not bend or twist timing belt.
!
Do not allow timing belt to come into contact with oil, wa-
ter, etc.
ITEM 1-3
Valve Lash Inspection
1) Remove cylinder head cover.
2) Inspect intake and exhaust valve lash and adjust as necessary.
Refer to SECTION 6A1 for valve lash inspection and adjustment
procedure.
When cold
(Coolant temperature
When hot
(Coolant temperature
Valve
lash
(
is 15 – 25
"
C or
59 – 77
"
F)
(
is 60 – 68
"
C or
140 – 154
"
F)
lash
specification Intake
0.13 – 0.17 mm
(0.005 – 0.007 in)
0.17 – 0.21 mm
(0.007 – 0.008 in)
Exhaust
0.23 – 0.27 mm
(0.009 – 0.011 in)
0.27 – 0.31 mm
(0.011 – 0.012 in)
Special Tool
(A): 09917-18210
Tightening Torque
(a): 12 N
.
m (1.2 kg-m, 8.5 lb-ft)
3) Install cylinder head cover and tighten bolts to specification.
ITEM 1-4
Engine Oil and Filter Change
WARNING:
New and used engine oil can be hazardous.
Be sure to read “ WARNING ” in General Precaution in SEC-
TION 0A and observe what in written there.
Use engine oil of SE, SF, SG, SH or SJ grade.
Select the appropriate oil viscosity according to the left chart.
For ambient temperature between – 20
"
C ( – 4
"
F) and 30
"
C (86
"
F),
it is highly recommended to use SAE 10 W – 30 oil.
Before draining engine oil, check engine for oil leakage. If any evi-
dence of leakage is found, make sure to correct defective part be-
fore proceeding to following work.
1) Drain engine oil by removing drain plug (1).
2) After draining oil, wipe drain plug clean. Reinstall drain plug, and
tighten it securely as specified below.
Tightening Torque
(a): 50 N
.
m (5.0 kg-m, 36.5 lb-ft)