Suzuki WagonR+ RB310, Руководство по обслуживанию

Страница: 2195 / 3086

1. Strut assembly
2. Steering knuckle
3. Suspension control arm
4. Ball stud
5. Wheel bearing
6. Front wheel hub
7. Wheel
3D-2 FRONT SUSPENSION
GENERAL DESCRIPTION
The front suspension is the strut type independent suspension. The upper end of a strut is anchored to the vehicle
body by a strut support. The strut and strut support are isolated by a rubber mount. A strut bearing is also installed
a little lower to the rubber mount.
The lower end of the strut is connected to the upper end of a steering knuckle and lower end of knuckle is attached
to the stud of a ball joint which is incorporated in a unit with a suspension control arm. And connected to this steering
knuckle is the tie-rod end.
Thus, movement of the steering wheel is transmitted to the tie-rod end and then to the knuckle, eventually causing
the wheel-and-tire to move. In this operation, with the movement of the knuckle, the strut also rotates by means
of the strut bearing and lower ball joint.