Stone Rhino 43 Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 66

Stone Rhino 43 Series Скачать руководство пользователя страница 8

Rhino

TM

43/54

Introduction

INTRODUCTION

This roller is ergonomically engineered to optimize operator interface with the total ma-
chine – it’s really “user friendly”. Besides good visibility to the roll-edge, as well as the
work surface, you’ll find that the controls are exactly in the right places for maximum
comfort. And it is very convenient to monitor all the consumables – fuel, hydraulic oil,
etc.

Our common sense approach to servicing is a valuable benefit. Thanks to our modular
design, everything that needs servicing is located behind one of the easy-access service
panels or is under the rear cowl.

For maneuverability and productivity, nothing beats the proven performance of center-
point articulation. Because the drum and tires track each other exactly, tight turns are
achieved smoothly. The roller is equipped with full positive traction, front to rear and
side to side, which keeps the roller moving through various conditions.

There’s power steering – a feature no operator wants to be without. A variable hydro-
static drive system provides infinitely variable speed control – from 0 to 4 mph. The
eccentric delivers a centrifugal force sufficient to compact all types of soil. Superior
vibration isolation to the operator is achieved by mounting heavy-duty shock mounts
between the eccentric and support frames.

The following instructions were compiled to provide you information on how to obtain
long and trouble-free use of the roller. Periodic maintenance of the roller is essential.
Read this manual in its entirety and follow the instructions carefully. Failure to do so
may cause injury to you or a bystander.

MACHINE CONFIGURATION DESCRIPTION

The Stone Rhino is supplied in six configurations:

• SD43

Smooth Drum

• SD54

Smooth Drum

• PD43 Pad foot

• PD54

Padfoot

• PDB43 Padfoot with blade

• PDB54 Padfoot with blade

INTENDED USE

These machines are designed to carry out the function of compacting material of the co-
hesive, bituminous and granular varieties. If used correctly they will provide an effective
and safe means of compaction and meet the appropriate performance standards.

Use of the machine in any other way is considered contrary to the intended use and will
void the warranty.

Danger Zone

While the machine is in use unauthorized persons must remain out side the danger zone.

«
...
6
7
8
9
10
...
»

Содержание Rhino 43 Series



































































Отзывы:

Нет отзывов