Steris P920011-649, Руководство оператора

Страница: 111 / 168

5-10
920011-649 Operator Manual Cycle and Control Value Programming
10. Press
SCROLL arrows
(up or down) to enable (
YES
) or disable
(
NO
) bar code reader. If NO is selected, display goes to
Step 21
.
11. Press
ENTER
touch pad to confirm setting. Display shows:
__ blinking
12. Operator ID function allows operator to scan a bar code to identify
processor operator. Operator ID is recorded on cycle printout.
Press
SCROLL arrows
(up or down) to enable (
YES
) or disable
(
NO
) optional Operator ID function.
13. Press
ENTER
touch pad to confirm setting. Display shows:
__ blinking
14. Patient ID function allows operator to scan a bar code to identify
patient associated with endoscope to be processed. Patient ID
is recorded on cycle printout.
Press
SCROLL arrows
(up or down) to enable (
YES
) or disable
(
NO
) optional Patient ID function.
15. Press
ENTER
touch pad to confirm setting. Display shows:
__ blinking
16. Device ID function allows operator to scan a bar code to identify
endoscope to be processed. Device ID is recorded on cycle
printout.
Press
SCROLL arrows
(up or down) to enable (
YES
) or disable
(
NO
) optional Device ID function.
17. Press
ENTER
touch pad to confirm setting. Display shows:
__ blinking
18. Procedure ID function allows operator to scan a bar code to
identify procedure in which endoscope to be processed was
used. Procedure ID is recorded on cycle printout.
Press
SCROLL arrows
(up or down) to enable (
YES
) or disable
(
NO
) optional Procedure ID function.
OPERATOR ID
YES
PATIENT ID
YES
DEVICE ID
YES
PROCEDURE ID
YES