manualshive.com logo in svg

SSD Drives 590+ Series, Руководство по эксплуатации продукта, Страница: 99 / 319

Поделиться
Скачать
SSD Drives 590+ Series Скачать руководство пользователя страница 99

The Operator Station

5-5

590+ Series DC Digital Converter

The Local Menu

There is also a separate Local menu which provides Local Setpoint information. This menu can
be accessed from anywhere in the Menu System by pressing the 

L/R

 key. Holding the

 M

 key

down in the Local menu will display additional Feedback information.

A toggle to the Local menu displays whichever is in force, Forward or Reverse, previously
selected by the 

FWD/REV

 key.

HOLD

Menu System

FORWARD
REF:      0.00%

FORWARD
FBK.      0.00%

operates from Local mode only

PROG

M

L/R

HOLD

REVERSE
FBK:      0.00%

REVERSE
REF:      0.00%

M

Local

Remote
Control

Control

Local Menu

FWD/REV key

menu/parameter

Mode

Mode

Figure 5-3  Viewing the Local Menu

The L/R Key

The

 L/R

 key (Local/Remote) only operates when the motor is stopped.

It toggles the drive between Local or Remote control and an appropriate menu on the Operator
Station is displayed; either a Local menu when in Local control, or a main programming menu
from the Menu System when in Remote control.

When in Local control, the Local LEDs, SEQ and REF, are illuminated and the RUN, STOP,
JOG, FORWARD/REVERSE, UP and DOWN local control keys can be used to control the
motor speed and direction.

Pressing the 

L/R

 key when in Local control mode selects Remote control mode and returns you

to your previous menu in the Menu System.

The PROG Key

The

PROG

 key only operates when in Local control mode.

It toggles the display between the Local menu and the main Menu System but the drive remains
in Local control.

Thus, the 

PROG

 key allows you to make changes to parameters normally available in Remote

control mode whilst remaining in Local mode operation.

HINT:

 W

hen operating the drive locally, it is quite useful to have a relevant parameter

selected in the main Menu System for easy access.

Содержание 590+ Series
































































































































































































































































































































Отзывы:

Нет отзывов