manualshive.com logo in svg

SSD Drives 590+ Series, Руководство по эксплуатации продукта, Страница: 311 / 319

Поделиться
Скачать
SSD Drives 590+ Series Скачать руководство пользователя страница 311

14-6

Serial Communications

590+ Series DC Digital Converter

Error Codes

ERROR REPORT (EE)

The EI-BISYNCH Prime Set contains the EE mnemonic. This is also an output parameter in the
MAIN PORT (P1), AUX PORT (P2) and SYSTEM PORT (P3) function blocks, where the
parameter value can be read and reset. Refer to the COMMS Option Technical Manual for
further details.

The following values are returned if an enquiry (reading information from the Converter) is
performed on this Read/Write parameter.

Writing any value to this parameter will set the value to >00C0. Clearing the last error value
may be useful in seeing a repetitive error re-occurring.

Value

Description

>00C0

No error

>01C7

Invalid mnemonic

>02C2

Checksum (BCC) error

>03C2

Framing or overrun error

>04C8

Attempt to read from a write-only parameter

>05C8

Attempt to write to a read-only parameter

>07C7

Invalid message format

>07C8

Invalid data (encoding error)

>08C8

Data out of range

Содержание 590+ Series
































































































































































































































































































































Отзывы:

Нет отзывов