Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 63 / 86

63
Faults
If your 1550+ is showing a fault on one of the screens, you have a fault present. Some faults set the system into standby
mode. In this mode, no further triggers are accepted until the reason for the fault has been corrected. Once the fault has
been corrected, cycle the power to reset the controller.
There are several faults that can occur, see table below. The 1550+ will recover from faults without intervention and will
indicate the fault on the fault screen. You can access the fault screen by touching the red exclamation box. You will then
see the fault screen where if the reason for the fault has been fixed, you can easily reset any fault message by touching the
“Reset” button:
Please refer to the table that follows for help on how to diagnose the reason for the fault. All faults have a tolerance time
which is the time the error needs to be active for the fault to occur.