Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 14 / 86

14

The inlet is 1/2” NPT (F) [1/2” BSPT (F) for Metric versions]. Connect the air supply lockout valve/filter
unit to the Air Inlet connection of the manifold using supplied ½” pipe nipple.
Electrical Connections
Full System Versions
The electrical connections for the system are all conveniently located on the right-hand side of the frame. The
connections are as follows.
External electrical connection location
Direction of flow
If your inlet filter assembly looks like this,
you can set the maximum pressure to the
system by using the built-in regulator and
gauge. Set to a recommend ed range
between 40 to 80 PSI (2.75 to 5.5 bar).
NOTE: Setting pressure higher than this will
damage the system.
Direction of flow
If your inlet filter assembly looks
like this, you must regulate the
air going to the system with your
own regulator. Set to a
recommend ed range between 40
to 80 PSI (2.75 to 5.5 bar).
NOTE: Setting pressure higher
than this will damage the system.