Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 38 / 86

38
to programmed cycle for 1 second. The system would wait for the next trigger signal and repeat the application. The
length of time spraying or Spray Period varies as the sensor reads the object.
Spray Delay is defined as the time the system waits before starting the Spray Period .
Spray Delay time can be set from 0.000 to 9999.999 seconds.
Stop Delay is defined as the time system sprays after the trigger signal has dropped.
Stop Delay time can be set from 0.000 to 9999.999 seconds.
To reiterate in the application the sensor or trigger signal is activated, the spray delay time is activated. Once the Start
Delay time is finished the system starts the Spray Period time which actuates the spray nozzle then sprays for the variable
amount of time based on the sensor reading of the objects, then the system continues to spray for the amount of the Stop
Delay has been programmed.
Spray follows trigger and repeats.
An example of this timing is shown in the following picture.
Parameters settings for Repeat:
Parameter Value
Start delay In seconds
Stop delay In seconds
Interval off In seconds
Interval on In seconds
Anticipator time In seconds – for use with air atomizing spray nozzles
Follower time In seconds – for use with air atomizing spray nozzles