Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 11 / 86

11
WARNING:
Before performing any maintenance, make sure all electrical, air and liquid supply lines to the system are shut
off and /or disconnected.
WARNING:
The use of any chemicals requires careful control of all worker safety.
WARNING:
Spraying Systems Co. does not manufacture or supply any of the chemical components used in this equipment
and is not responsible for their effects. Because of the large number of chemicals that could be used and their different
chemical reactions, the buyer and user of this equipment should determine compatibility of the materials used and any of
the potential hazards involved.
WARNING:
Spraying Systems Co. strongly recommends the use of appropriate safety equipment when working with
potentially hazardous chemicals.
This equipment includes but is not limited to:

Protective hat

Safety glasses or face shield

Chemical-resistant gloves and apron

Long sleeve shirt and long pants
WARNING: Always remember to carefully read the chemical manufacturer’s label and follow all directions.
Installing the System
Unpack the Components
The system components come carefully packaged to protect them from damage and consist of the enclosure, which
contains the electronic and pneumatic controls, plus a separate box which contains accessories. Open all boxes! Check
inside every box for various components.
All units include the following accessories:
o
Electrical power cord - installed on unit
o Air supply lockout valve/filter unit (not with Panel Only version)
o Liquid strainer (not with Panel Only version)
o
Liquid re-circulation fitting (not with Pressure Pot or Panel Only versions)
Depending on your system configuration, the following additional accessories may be included:
o
Trigger input cable(s)
o Photoelectric object sensor with cable and bracket
o
Thru beam sensor with cables and brackets
o
Hand held trigger switch
o Input signal cable for remote Duty Cycle control
o Fault output cable kit
o
PulsaJet ® nozzle or electric spray nozzle connector cable(s)
o Spray nozzle(s)
o Spray nozzle hook up kit
Please check the packaging slip for confirmation of contents and quantity of packages. Pump less and Pressure Pot versions
sold with a pressure pot will be shipped in multiple packages.
NOTE:
The packing boxes may contain exposed cables and hoses. Always use caution when opening the boxes to avoid
accidental damage or slicing of various components.
Remove everything from all of the boxes and carefully remove any packaging material protecting the components.
Caution should be used when using a knife to cut the packaging. Be careful not to cut through and scratch the panel.
Verify that the accessories required for your specific system configuration are included. Check all boxes and any packing
materials for parts and components. If anything is missing, or if there are any questions, contact Spraying Systems Co.
Customer Service immediately.